Arduino L293D Motor Driver Shield

1. 2 connections for 5V ‘hobby’ servos connected to the Arduino’s high-resolution dedicated timer
2. 4 H-Bridges: L293D chipset provides 0.6A per bridge (1.2A peak) with thermal shutdown protection, internal kickback protection diodes.
3. Can run motors on 4.5VDC to 25VDC.
4. Up to 4 bi-directional DC motors with individual 8-bit speed selection (so, about 0.5% resolution)
5. Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil, or interleaved stepping.

Features :

1.  2 connections for 5V ‘hobby’ servos connected to the Arduino’s high-resolution dedicated timer

2.  4 H-Bridges: L293D chipset provides 0.6A per bridge (1.2A peak) with thermal shutdown protection, internal kickback protection diodes.

3.  Can run motors on 4.5VDC to 25VDC.

 4.  Up to 4 bi-directional DC motors with individual 8-bit speed selection (so, about 0.5% resolution)

5.  Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil, or interleaved stepping.

6.  Pull-down resistors keep motors disabled during power-up

7.  Big terminal block connectors to easily hook up wires (18-26AWG) and power

8.  Arduino reset button brought up top

9.  2-pin terminal block and jumper to connect external power, for separate logic/motor supplies

10. Tested compatible with Arduino Mega 1280 & 2560, Diecimila,  Duemilanove, and UNO

11.  Download the easy-to-use Arduino software library, check out the examples and you’re ready to go!