HM-10 MODULE

SPECIFICATIONS:

• Operating voltage: +2.5v to +3.3v
• Requires up to 50mA
• Uses around 9mA when in an active state
• Use 50-200uA when asleep
• RF power: -23dbm, -6dbm, 0dbm, 6dbm
• Bluetooth version 4.0 BLE
• Default baud rate pre firmware V700 is 9600
• Default baud rate firmware V700 and up is 115200
• Based on the CC2 540 or the CC2541 chip.

DESCRIPTION: HM-10 Bluetooth module is a Bluetooth Low Energy (Bluetooth 4.0) development module based on the CC02541 Chip from Texas Instruments. The module communicates through UART protocol using AT commands. It can be used to communicate with all BLE devices like Fitness bands, Bluetooth trackers etc or even used as an iBeacon.The module has a built-in CPU that supports IO expansion, 14-bit two channel ADC, 120Hz four channel PWM etc. It has a range of 60 meters and consumes very low power in standby mode. The module can act both as a Master and as a Slave.

Applicable for interfacing with Ardunio, IOS communication projects.It is used for communication as a bluetooth module.